When I was taking photos of the Viking warrior for my painting tutorial, I forgot to take a sequence when I did the shield weathering. I felt bad about it, so...Saxon Shield Tutorial
1. This tutorial starts with a mostly finished Wargames Factory Saxon Thegn warrior- I typically save the shield for last.
2. I apply the base tones, slightly darker than what I want in the end. If you want a weathered and beaten shield, it is okay (and maybe even a good idea) to leave the base coat a little patchy. In this case I used Games Workshop ‘Deneb Stone’ mixed with white (about 50/50) and Games Workshop ‘Knarlock Green’ with a touch of ‘Orkhide’. When laying out the design, be aware of the rivets- they serve as a useful guide for dividing the round surface equally.
3. I added a little more white to the ‘Deneb Stone’ and a little of the ‘Deneb Stone/white’ mix to the green. I think it looks good to leave a hint of line where the colors meet.
4. For tears in the leather cover, I paint on a medium to dark brown. I think this was a Ceramcoat “Burnt Umber’.
5. I paint a sliver of light brown over the dark brown cuts, trying not to cover them up completely. It is okay if you miss on a couple, or put the lines adjacent rather than overlapping.
6. With a lighter layer of the color used for the shield colors, paint a thin highlight next to a few of the rents.
7. Lastly I create a dirty or stained layer using brown paint thinned with water or a purpose made transparent wash. In this case I used a Secret Weapon wash, ‘Dark Sepia’. At this point I often add a little of the thin stain color to the lower legs and shoes.
Thanks for looking!